View DHS887200H-UP_8975533.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 1 df59 series 2016.1 e features common to all series 1. high operating temperature df59? are rated at temperatures up to 105 ?. df59 2. swing lock structure (wire-to-board) the df59 features a ?swing-lock? mechanism that employs both a positive and friction lock. this helps to prevent accidental unmating by severe wiring and mechanical stress. 3. short-circuit pin the short-circuit pin allows the termination of an open circuit. typically used at the end of a series of connected circuit boards. 4. multi function design the df59 has the ability to function as either a board-to- wire or board-to-board system. the pcb mounted receptacle is designed to mate with the w-to-b, b-to-b, and short circuit pin connectors. this multi function ability allows versatility while keeping connectors to a minimum. 5. contact design the terminal design features two-point contact to ensure a highly reliable connection. 6. common applicator crimping can be performed using the applicator (ap105- df11-22s) for the existing series df11-22s c f(a), by replacing the die with the one for df59 series. * for crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of df59-22pcfa. common to df59/59s/59sn 7. floating structure (board-to-board) the board-to-board connector can be used to connect two pcb together in a co-planar arrangement and features a ?stress free contact? that floats 0.5mm in the x, y and z dimensions. 8. space savings the df59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with awg#22 cable. the single position floating plugs df59s and df59sn are specifically designed to save space, and can be mounted in high density applications. 9. robust locking structure on df59m (w-to-b connection) the lock mechanism on compact df59m provides 16n horizontal lock strength. (fig.4) 10. standardization of pcb layout the df59s/sn type is used on board-to-board connections, and the df59m type is intended for wire-to-board connections. although they have different receptacles, the pcb mounting pattern can be used for these two types. different combinations of these connectors can be used in the same system with a common pcb. this allows for standardization of pcb. (fig.5) (note) each stencil mask is necessary df59 floating amount 0.5mm(x,y, z directions) df59s/sn floating amount 0.5mm(x,y direction), 0.2mm(z direction) %#*bb %#*bb %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc %#* %#' %#*bb oy^gzxi^dc my^gzxi^dc ny^gzxi^dc 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) 8jggzci8^gxj^i positive lock friction lock 2.48mm ortircit pin inlock trctre ortoire e fi. fi.2 fi. to strctre f fi.4 tnrition o p ttern fi. df59s/sn type and df59m type can be used in the same system by using a common pcb. clear tactile click and high locking strength achieved by the robust locking mechanism mating force : 16n min. (in a horizontal direction) 16n min. 2 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) product specifications ratings current rating df59/s/sn 3a operating temperature : -40 to 105? (note 1) operating humidity range : 20 to 80% df59m 6a (22 awg), 5a (24 awg) 4a (26 awg), 3a (28 awg) voltage rating df59/s/sn ac/dc 230v (note 3) storage temperature range : -10 to 60? (note 2) storage humidity range : 40 to 70% (note 2) df59m ac/dc 350v (note 3) items speci cations conditions 1.contact resistance df59- ? p-2fc/sp df59s/sn 50m?min. under 6v dc, must be measured by 100ma (dc or 1000hz) df59m-1s-h 45m?min. df59- ? p-2c 30m?min. 2.vibration no electrical discontinuity over 1?. frequency 10 to 55hz, single amplitude 0.75mm, 3 directions, 10 cycles each 3.shock no electrical discontinuity over 1?. acceleration 490 m/s 2 , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. 4.humidity contact resistance insulation resistance temperature 40 ?2?, humidity 90 to 95%, left for 96 hours df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 5.temperature cycle contact resistance insulation resistance (-55?: 30 min. ? 5-35?: 2 to 3 min. ? 85?: 30 min. ? 5-35?: 2 to 3 min.) 5 cycles df59- ? p-2fc/sp df59s/sn 50m?min. 1000m?max. df59m 45m?min. df59- ? p-2c 30m?min. 6. operating life contact resistance number of insertion and withdrawal force df59- ? p-2fc/sp 50m?min. 30 times df59- ? p-2fc/sp df59s/sn 10 times df59m 45m?min. 20 times df59- ? p-2c 30m?min. 10 times 7. resistance to soldering heat no melting of resin which affect the performance. re ow : depends on recommended temperature pro le. hand soldering : soldering iron temperature 350 ?10?, 3 sec. note 1 : including temperature rise caused by current ow. note 2 : the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. note 3 : the rated voltage is the applied voltage when connectors are mounted parallel to each other on the pcb with a distance of 1.6mm or more between them. hirose recommends his mounting distance. this mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300v, according to iec 60664 and jis c 60664 standards. materials / finish items parts materials treatment ul specification receptacle df59 insulator lcp natural ul94v-0 contact phosphor bronze gold plated --------------- df59s tin plated df59m copper alloy floating plug df59 insulator pbt white ul94v-0 contact brass gold plated --------------- df59s insulator lcp natural ul94v-0 contact brass tin plated --------------- df59sn insulator lcp natural ul94v-0 contact brass tin plated --------------- crimp contact df59m copper alloy short pin insulator pbt white ul94v-0 contact brass gold plated --------------- crimp case insulator pbt white ul94v-0 crimp contact contact phosphor bronze gold plated --------------- 3 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) ordering information please refer to the ordering information below for each connector type receptacle df 59 # ? * s? * v qwe rt yu short-circuit pin crimp socket ? contact 8up# df 59 # ? * p? * fc qwe rt yu df 59 ? * p?2sp qw er ty df 59 ? * p?2c q w er ty df 59 m ? 2224 pcf qwe r t ? plug q series name : df w series no. : 59 e none : standard s b-to-b type m w-to-b type r number of contacts : 1, 2, 3, 4 t type of connector s : receptacle y pitch y none : single contact type 2 : standard 2mm (4mm : without the central contact) u termination form y v : smt straight type (b-to-b type) y h : smt right angle type (w-to-b type) q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form sp : short pin q series name : df w series no. : 59 e number of contacts 2, 3, 4 r type of connector p : plug t pitch : 2mm y termination form c : crimp case q series name : df w series no. : 59 e none : standard m single contact type (w-to-b m=micro) r applicable wire 22 22 awg 2224 22 to 24 awg 2628 26 to 28 awg t form type/package type/plating type pcfa : plug crimping contact?eel contact?old plating pca : plug crimping contact?ulk contact?old plating pcf : plug crimping contact?eel contact?in plating pc : plug crimping contact bulk contact?in plating q series name : df w series no. : 59 e none : standard s single contact type sn single contact slim type r number of contacts df59 2, 3, 4 df59s/sn 1 t type of connector p : plug y pitch 2 : df59 : 2mm (4mm : without the central contact) y none : df59s/sn/m u termination form fc : floating 4 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) [speci? cation no.] (51) : gold plating, emboss packaging straight receptacle (smt) %#, '#,* ,#** ,#.* 6 7 kvxjjb vgzv e2' 8 9 '#( 6 : %#%* %#+* %#%* &#%* %#%* &#) %#%* e2' %#%* 8 %#%* &#& %#%* +#&* %#%* &#) %#%* unit : mm part no. hrs no. no. of contacts a b c d e df59-2s-2v(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 df59-3s-2v(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 df59-4s-2v(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 df59-2s-4v(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * df59-2s-4v(51) is made by removing the middle pin of df59-3s-2v(51) at the factory. note : please order in full reel quantities. (2,000 pcs/reel) unreeling direction f f g g g-g f-f 12 0.1 4 0.1 2 0.1 (24) 1.75 0.1 11.5 0.1 22.25 +0.2 0 ? 1.5 +0.1 0 packaging dimensions recommended pcb dimensions (t=1.6mm) [speci? cation no.] (50) : gold plating, tray packaging floating plug 2.65 p=2 b a 17.1 unit : mm part no. hrs no. no. of contacts a b packaged quantity/tray df59-2p-2fc(50) 667-0006-4 50 2 7.2 2.0 50 df59-3p-2fc(50) 667-0007-7 50 3 9.2 4.0 df59-4p-2fc(50) 667-0008-0 50 4 11.2 6.0 df59-2p-4fc(50) 667-0020-5 50 2* 9.2 4.0 * df59-2p-4fc(50) is made by removing the middle pin of df59-3p-2fc(50) at the factory. note : please order in full tray quantities. (50 pcs/tray) 5 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) short-circuit pin crimp socket [speci? cation no.] (50) : gold plated, tray packaging unit : mm part no. hrs no. no. of contacts a b c packaged quantity/tray df59-2p-2sp(50) 667-0017-0 50 2 7.2 5.9 2.0 100 df59-3p-2sp(50) 667-0018-3 50 3 9.2 7.9 4.0 df59-4p-2sp(50) 667-0046-9 50 4 11.2 9.9 6.0 note : please order in full tray quantities. note : for 4 pos. type contact no.1 and 2, no.3 and 4 are connected respectively. unit : mm part no. hrs no. no. of contacts a b c d df59-2p-2c 667-0011-4 00 2 7.2 5.9 5.2 2.0 df59-3p-2c 667-0012-7 00 3 9.2 7.9 7.2 4.0 df59-4p-2c 667-0013-0 00 4 11.2 9.9 9.2 6.0 note : please order in full pack quantities. (100 pcs/pack) '#)) 9 e2' '#)( -#&* 8 6 7 '#'- '#)( ,#.* 7 6 '#'- e2' 8 [speci? cation no.] none : 100 pcs/pack 6 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. packaging quantity treatment df59-22pcfa 667-0016-8 00 reel contact (note 1) 10,000 contacts / reel gold plated df59-22pca 667-0022-0 00 bulk contact (note 2) 100 contacts / pack note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) applicable wire (tin plated soft copper wire) conductor size (wire constitution) jacket diameter 22 awg (17 / 0.16mm) ul1061 (1.26mm) ul3265 (1.38mm) i2%#' %#, &#' +#& ( &#* %#-* &#*) %#- crimp contact recommended wire ul1061, ul3265 strip length 1.7 to 2.3mm note : please contact your nearest hirose sales representative for information regarding compatible wire remarks: please consult with our sales representative when using wires other than applicable wire. note : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0504) for details. 7 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) part no. hrs no. df59s-1p-fc(21) 667-0023-3 21 note : please order in full reel quantities. (10,000 pcs/reel) plug center markings hrs logo mark cav no. 21.6?.3 2.?.37 1.13?.2 single contact type floating plug [speci? cation no.] (21) : tin plating, emboss packaging cav no. hrs logo mark g plug center markings 1.17?.2 1.7?.2 17.7?.3 single contact slim type floating plug part no. hrs no. df59sn-1p-fc(21) 667-0028-7 21 note : please order in full reel quantities. (10,000 pcs/reel) note : use the special (df59sn-1p-fc/in-tool) tool for connector insertion. [speci? cation no.] (21) : tin plating, emboss packaging part no. hrs no. df59s-1s-v(21) 667-0024-6 21 note : please order in full reel quantities. (10,000 pcs/reel) contact portion lock portion board edge board edge 0.9 ? 0.05 1.5 ? 0.05 0.9 ? 0.05 1.5 ? 0.05 3.05 ? 0.05 6.2 ? 0.05 distance between pads:3.0mm min. distance between pads:3.0mm min. contact portion lock portion b-b unreeling direction b b a a a-a 4 ?.1 4 ?.1 2 ?.1 (16) 7.5 ?.1 1.75 ?.1 14.25 +0.2 0 t=0.3 ?.05 1.5 +0.1 0 lock portion contact portion vacuum area 1.7 ? 0.3 1.1 ? 0.2 1.7 ? 0.3 1.1 ? 0.2 4.3 ? 0.2 1.55 ? 0.15 0.2 ? 0.1 1.45 ? 0.15 1 ? 0.15 1 ? 0.2 1 ? 0.2 5.8 ? 0.3 single contact type straight receptacle (smt) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) mount the lock portion side towards the board edge. 8 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) b-b a-a t=0.30.05 b b a a vacuum area direction of unreeling 14.25 +0.2 0 (16) 40.1 20.1 90.1 (1) 80.1 40.1 1.750.1 0.50.2 0.820.2 t=0.20.05 10.2 1.150.2 20.2 30.2 2.50.2 5.450.3 1.850.2 p=5.50.2 1.250.2 part no. hrs no. applicable wire by type quantity treatment recommended wire jacket diameter conductor size wire constitution df59m-2224pcf 667-0042-8 00 ul10368 1.11 to 1.26mm 22 awg 17 / 0.16mm reel contact (note 1) 10,000/reel tin plated 24 awg 11 / 0.16mm df59m-2224pc 667-0044-3 00 1.26 mm 22 awg 17 / 0.16mm bulk contact (note 2) 100/pack 1.11 mm 24 awg 11 / 0.16mm df59m-2628pcf 667-0043-0 00 0.88 to 0.98mm 26 awg 7 / 0.16mm reel contact (note 1) 10,000/reel 28 awg 7 / 0.17mm df59m-2628pc 667-0045-6 00 0.98 mm 26 awg 7 / 0.16mm bulk contact (note 2) 100/pack 0.88 mm 28 awg 7 / 0.17mm note 1 : please order reel contacts by full reel quantities. (10,000 pcs/reel) note 2 : please order loose piece contacts in full pack. (100 pcs/pack) note 3 : please consult with our sales representative when using wires other than applicable wire. note 4 : the strip length is a reference value. please make adjustments so nished crimps will meet the speci ed values. refer to the crimping quality standards (atad-h0778) for details. single contact type right angle receptacle (smt) single contact type crimp contact part no. hrs no. df59m-1s-h(21) 667-0041-5 21 note 1 : please order in full reel quantities. (10,000 pcs/reel) note 2 : this connector is designed to mate with crimp contact of df59m only. (p.8) 1.95 0.2 1.20.2 1 0.2 vacuum area 4.4 0.3 2.2 0.3 2.6 0.3 parallel arrangement recommended pcb layout( : ) pcb end side(conductor) the size between pattern : 1.6mm min pattern prohibition area 3.3mm min (2mm min ) (5.9) 4.6 0.05 (2.6) (1.3) recommended pcb pattern( : ) connector outline (5.9) 1.5 0.05 0.9 0.05 3.70.05 1.2 0.05 1.5 0.05 2.6 0.05 y (0.2) 4.60.05 0.60.05 1.2 0.05 (0.2) [speci? cation no.] (21) : tin plating, emboss packaging packaging dimensions recommended pcb dimensions (t=1.6mm) 9 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) applicable crimping tool mating dimensions types part no. hrs no. applicable contact remarks applicator ap105-df59-22p 901-4619-8 00 df59-22pcfa ap105-df59m-2224p 901-4638-2 df59m-2224pcf DHS887200H-UP (note 2) manufactured by japan automatic machine co., ltd. ap105-df59m-2628p 901-4639-5 df59m-2628pcf dhs887300h-up (note 2) manufactured by japan automatic machine co., ltd. press unit cm-105 901-0005-4 00 - hand tool ht801/df59-22p 901-4619-8 00 df59-22pca t ul1061 awg#22 0omz ht801/df59m-2224p 550-0420-3 df59m-2224pc t ul10368 awg#22 z 24 0omz ht801/df59m-2628p 550-0421-6 df59m-2628pc t ul10368 awg#26 z 28 0omz hand tool 8up# df-c-po(b) 550-0179-2 00 df59-22pcfa df59-22pca df-c-po(a) 550-0170-8 00 df59m 4fsjft extraction tool #up# df59sn-1p-fc/in-tool 667-0040-2 00 df59sn-1p-fc note 1 : customers are strongly encouraged to utilize hrs application tooling or tooling created by a hirose tooling partner. hirose assumes no liability for customers using tooling from non-recognized sources. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding crimping issues when using applicators manufactured by j.a.m. url http://www.jam-net.co.jp board-to-board connection (floating plug) [standard] [single contact type] df59-*p-2fc df59-*s-2v df59-*s-2v (2.8) (0.5) (17.1) df59s-1p-fc contact portion contact portion lock portion df59s-1s-v df59s-1s-v (1.18) (21.6) (0.5) (2.7) [single contact slim type] short-circuit pin connection df59sn-1p-fc df59s-1s-v df59s-1s-v (1.2) (18.6) (17.7) (0.5) (1.7) contact portion contact portion lock portion df59-*p-2sp df59-*s-2v (7.95) (2.48) wire-to-board connection [single contact type] wire-to-board mated condition [standard] df59-*p-2c df59-*s-2v (2.48) 10 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) operating precautions 1. recommended temperature profile (lead-free soldering possible) 2. recommended hand solder conditions soldering iron temperature : 350 ?10?, soldering time : within 3 seconds 3. recommended screen thickness, open ratio (pattern area ratio) thickness 0.1mm, open ratio : 100% 4. warpage of pc board maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. cleaning condition cleaning with ipa is possible. (cleaning is not recommended. in case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. precautions when inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. do not mate/un-mate a non-terminated plug with a non-mounted receptacles. this may lead to damage or deformation of the contacts. please note that pulling on the wires or cable during un-mating may cause damage. do not apply flux to the contact terminals when hand soldering the receptacle to the board. flux can wick into the electrical contact areas and may lead to connection failures. slight discoloration on the insulating materials will not affect form, fit or function of the connectors. please refer to the following for the points for proper handling regarding mating/unmating operations. ?f59 insertion and removal manual ?f59s insertion and removal manual?atad-h0651 ?f59sn insertion and removal manual?atad-h0719 ?f59m operation manual atad-h0779 [applicable conditions] 1. peak temperature : max 250? 2. heated area : 220? or above, within 60 sec. 3. pre-heating area : 150 to 180?, 90 to 120 sec. 4. number of times : within 2 times *measured at contact lead area please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) above temperature profile is our recommended value. 50 60sec max 100 150 200 250 0 temperature ? pre-heating time soldering time time sec 90 ? 120sec 180? 220? 10sec max max 250? 11 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) memo : 12 df59 series 2mm pitch, multi functional connector system (floating [board-to-board], swing-lock [wire-to-board], short-circuit pin) the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co., ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 429-849 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuernberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.519, regus-green boulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/

▲Up To Search▲

Price & Availability of DHS887200H-UP

	To Download DHS887200H-UP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .